Product Solutions > Access Network Solutions > HFC Outside Plant > Optical Nodes and Broadband Amplifiers

Optical nodes and broadband amplifiers

The Access is a product series consisting of compact nodes and amplifiers. The basic design of the Access platform determines not only its capability and its ease of use but also its ability to expand as new needs arise.

Access platforms are available in wide range of models from an optical node to a distribution amplifier. Trend toward fibre rich architecture is fully supported in the platform.

Changes in the networks are inevitable, but now there is a way to make them easier, faster and far less expensive.

ACcess series optical nodes and broadband ampliifers

Description	Product	Details
Amplifier	AC500	Single active output amplifier with 39 dB of gain.
Amplifier	AC500 G	Amplifier, 1006 MHz, single active output amplifier with 39 dB of gain.
Amplifier	AC1000	Amplifier, 862 MHz, single active output amplifier with 29 dB gain.
Amplifier	AC1000 G	Amplifier, 1006 MHz, single active output amplifier with 42 dB of gain.
Amplifier	AC2000 G	Amplifier, 1006 MHz, dual active output amplifier with 2 x 39 dB gain.
Amplifier	AC3000	Single active output amplifier with extended frequency and gain ranges and integrated electrical controls in both up- and downstream.
Amplifier	AC3200	An amplifier with extended frequency and gain ranges and integrated electrical controls in both up- and downstream. It provides two active outputs with individual signal controls.
Optical node	AC800 G	Optical node, 1006 MHz, single active output. It is based on fixed receiver concept but new features can be added by flexible modular solutions.
Optical node	AC8000	Dual active output node. It is based on fixed platform but new features can be added by flexible modular solutions.
Optical node, intelligent	AC8800	This dual active output node features automatic alignment of both forward and return path. Along its simplicity and enviable performance, the easy operation stands out as its key advantage.
Optical node, intelligent	AC9000	This intelligent 4 output optical node is based on fixed platform but flexible modular solution, supporting up to two optical receivers, four optical transmitters and dual power supplies.

Optical modules

Receiver module	AC6610	Fibre optic receiver module for the optical nodes of Access platform.
Transmitter modules, CWDM	AC6700	AC6745...AC6762 products are CWDM DFB laser transmitter modules for the return path applications of AC node.
Receiver module	AC6810	Fibre optic receiver module for the optical nodes of Access platform.
Receiver module	AC6820	Fibre optic receiver module for the optical nodes of Access platform.
Transmitter module	AC6830	Low optical output power 1310 nm Fabry Perot laser transmitter module for the return path applications of AC node.
Transmitter module	AC6835	Low optical output power 1310 nm Fabry Perot laser transmitter module for the return path applications of AC node.
Transmitter module	AC6840	1310 nm Fabry Perot laser transmitter module for the return path applications of AC node.
Transmitter module	AC6845	1310 nm DFB laser transmitter module for the return path applications of AC node.
Transmitter modules, CWDM	AC6800	AC6847, -49, -51, -53, -55, -57, -59 and -61 are CWDM DFB laser transmitter modules for the return path applications of AC node.
FWDM filter	AC6570	FWDM filter for optical nodes in AC platform.
Wideband WDM filter	AC6572	Wideband high isolation WDM filter for optical nodes in AC and CX product families.
Optical combiner / splitter	AC6579	Optical combiner/splitter product fo AC platform.

Transponder modules

Transponder module	AC6911	Element Management Transponder for the AC platform.
Transponder module	AC6951	Element management transponder with forward and return path level measurement and ALSC controller unit for the AC platform.
Transponder module	AC6952	Element management transponder with forward and return path level measurement unit and ALSC controller. AC6952 replaces AC6951 transponder and can be plugged into any AC platform equipped with compatible transponder slot.
Transponder module	AC6991	Transponder module containing RF modem and level measurement unit. It can be used to add remote monitoring and control, ALSC with fully user programmable pilots, automatic forward and return path alignment, forward path spectrum analyser, return path ingress analyser and return path pilot generator to compatible AC platforms.

Upstream modules

Upstream Signal Module	AC6140	Passive return path module
Upstream Signal Module	AC6144	Return path amplifier
Upstream Module	AC6136	High gain return path amplifier

Input and output modules

Plug-In Modules

AC61xx

Plug-in modules to be used as input or output modules in AC-amplifier platform products.

Power supplies

Power supplies	ACX	AC6313/-14 products are complete kits for replacing the existing PSU with a new one. These power supplies can be used in optical nodes and amplifiers (AC500/800/1000/2000/3000/3200).
Power supply module	AC6310	Power supply module to be used in AC8000 optical nodes.
Power supplies	AC631x	Housing lids with power supplies to be used in AC8000/8800 optical platforms.
Power supply module	AC6316	PSU used in AC9000 optical node. It can work alone or it can be operated parallel to split the work load and create the redundancy system for internal power feeding.
Transformer	PFS301	PFS301 transformer is purposed to feed remote powered HFC-networks.
Transformer	PFM600	PFM600 transformer is purposed to feed remote powered HFC-networks.

Accessory modules

Electrical gain and slope adjustment module	AC6170	Module is designed to operate together with AC6950 transponder in AC1000 or AC2000 platforms.
Switching module	AC6471	Switching module with a test point. Used in AC8800.
Manual gain and slope adjustmentmodule	AC6171	Module is designed to be used as an input module in AC-platform amplifiers.
Manual gain and slope adjustment module	AC6172	Adjustable gain and slope control module for AC platform amplifiers with integrated adjustable cable simulator.
Electrical level adjustment module	AC6174	Attenuator module for AC8000 optical node.
Electrical level adjustment module	AC6173	Attenuator module for AC800 and AC8000 optical nodes.
Manual control unit	AC6183	Control module for optical node AC8000, which is needed for manual adjustment of gain.
Upstream signal modules	AC619x	AC6190, -91, -92, -93, -95, -96, -97 and -98 upstream signal modules for AC8000 platform.
ALSC module, single pilot 535.25 MHz	AC6151	The AC6151 is needed in AC1000 and AC2000 platforms to operate them in ALSC mode with one pilot signal.
Ingress blocker	AC6223	This plug-in module is designed to be used in AC-series distribution amplifiers.
Temperature compensating plug-in	AC6225	This temperature compensating plug-in module is designed to be used for return channel in AC-series amplifiers.
Passive Ingress Blocker and Notch Filter	AC6227	This plug-in module is designed to be used in AC-series distribution amplifiers.
High pass filter	AC6238	This plug-in module is designed to be used in AC-series amplifiers.
High pass filter	AC6240	This plug-in module is designed to be used in CXE and AC-series amplifiers.
Low pass filters	AC621x	LP filters are needed in AC-amplifier platforms, when optical node solution is used.

Online Billing OVT-account: 003711022678 Operator: TietoEnator Account Number: TE003711022678

Teleste Corporation, P.O.Box 323, FI-20101 Turku Finland, Tel. +358 2 2605 611

>> Sitemap
>> Legal notice