AC2500 Amplifier

The AC2500 is a dual active output amplifier with 2 x 43 dB operational gain. It offers high output level (111.5 dBμV, 112 channels) and supports 1.2 GHz/204 MHz bandwidth.

The AC2500 amplifier is equipped with the latest technology and delivers incredible performance, flexibility and cost-effectiveness. This amplifier can be used as high gain distribution amplifier, but also as a lower gain trunk amplifier with bridger output. The AC2500 also complies with the DOCSIS 3.1 standard, an important feature designed to meet future service requirements.

Features at a glance:

1.2 GHz bandwidth
Forward amplifiers use GaN HEMT and GaAs pHEMT technology
GaAs push-pull return amplifier on the motherboard
Temperature compensated forward and return path
Flexible 862/1006/1218 MHz interstage slope pivot point selection
Excellent ESD and surge protection
Remote power supply with PFC
Fixed station memory for electrical identification
Optional AC6188 temperature compensating MLSC unit with RIS
Optional AC6158 agile pilot ALSC unit with RIS

NOTE: This product has reached end-of-life status which means that it may no longer be supported and is not orderable from Teleste. Please see the end-of-life page in MyTeleste for more information.

Product Specifications

Downstream signal path (values with diplex filters)

Frequency range

85…1218 MHz

Return loss

20 dB

Operational distribution gain

2 x 43 dB

Maximum distribution gain

2 x 47 dB

Operational trunk gain

35 dB

Maximum trunk gain

41 dB

Input attenuator control range

20 dB

Input equaliser control range

25 dB

Interstage nominal slope (distr./trunk)

13 dB/7 dB

Pivot point frequency

862 MHz/1006 MHz/1218 MHz

Interstage slope control

±4 dB

Interstage gain control

±4 dB

Flatness

±0.4 dB

Group delay

2 ns

Test point

-20 dB

Noise figure

< 5.7 dB

Umax (112 x QAM channels) @ 1 GHz (distr./trunk)

111.5 dBµV/109.5 dBuV

Umax(138 x QAM channels) @ 1.2 GHz (distr./trunk)

108.5 dBµV/107.0 dBµV

CTB 41 channels (distr./trunk)

117.5 dBµV/115.5 dBµV

CSO 41 channels (distr./trunk)

120.0 dBµV/118.0 dBµV

XMOD 41 channels (distr./trunk)

114.5 dBµV/112.0 dBµV

CTB mixed raster (distr./trunk)

79 dB/79 dB

CSO mixed raster (distr./trunk)

73 dB/73 dB

Upstream signal path (values with diplex filters)

Frequency range

5…65/85/204 MHz

Return loss

18 dB

Gain

2 x 28 dB

Ingress switching

0/-6/< -45 dB

Output attenuator control range

0…- 15 dB

High/low gain mode selection

2 x 28 dB/2 x 16 dB

Nominal slope (65/204 MHz)

0/3 dB

Equaliser control range

0…15 dB

Flatness

±0.5 dB

Noise figure, f<65 MHz

< 7.0 dB

Noise figure, f<204 MHz

< 8.5 dB

General

Power consumption (65 & 90/230 VAC)

38/40 W

Supply voltage

27…65/40…90/205…255 VAC

Maximum current feed through

7.0 A/port

Hum modulation

70 dB

Resistance for remote current

25 mΩ/port

Input/Output connectors

PG11 thread, other types available

Test point connectors

F female

Dimensions (h x w x d)

245 mm x 255 mm x 107 mm

Weight

3.9 kg

Operating temperature

-40…+60 °C

Class of enclosure

IP67

EMC

EN50083-2

ESD

4 kV

Surge

6 kV (EN 60728-3)

Accessories

Teleste offers a variety of accessories including both active and passive modules and power solutions. The accessories are designed and tested for Teleste broadband equipment. Find the products that suit you and get more of your network.

Support

Teleste´s experts are available for providing professional support. Find out how we can be at your service.