The ICON6998 is a DOCSIS 4.0 compatible HMS transponder with remote monitoring, control, and ingress measurement for Teleste ICON series amplifiers.
Field-upgradeable plug-in diplexers for ICON nodes and amplifiers, featuring automatic electronic recognition for quick and reliable alignment.
The ICON6320 power supply supports ICON4300 System Amplifier modules in ICON4000 and legacy amplifier housings, with short-circuit and transient protection.
The ICON6310 power supply supports ICON3100 Line Extender modules in ICON3000 and legacy amplifier housings, with short-circuit and transient protection.
Connect and configure Teleste amplifiers and nodes wirelessly with the AC6903 USB-C to BT adapter, offering reliable connectivity up to 10 meters.
The ICON6996 is a DOCSIS 4.0 compatible HMS transponder that enables remote monitoring, control, and return path pilot generation for Teleste ICON series amplifiers.
The ICON6416 are diplexer slot lids designed for use with the ICON3000 and ICON4000 series RF modules.
The ICON6404 is a wall mounting bracket for ICON3000 and ICON4000 amplifier housings.
The AC6429 is a cabinet mounting bracket for AC series amplifiers and optical nodes.
The AC6322 is a 27...65 VAC / 35...90 VDC switch mode power supply kit for AC9400 optical nodes.
The AC6902 is an adapter for connecting a PC or a tablet/mobile device to Teleste products using an industry-standard wireless BT connection.
The ANT/Crimp protectors provide long-lasting and reliable protection for spliced fibre connections.
Shrink sleeves designed for maximum moisture protection when fitted on outdoor passive components.
The AD-041L are unique test probes designed to match with 5/8” ports.
The AC6993 is a DOCSIS 3.1 frequency range compatible CATVisor/HMS transponder containing an RF modem and a level measurement unit.
The HDX201 Connector tool is intented for easy installation or removal of F connections in high-density or hard-to-reach locations.
The HDX115 is a replacement fan kit for HDO units
The HDX007 cover plate is a a simple solution to cover any empty module slots in HDX headend rack setups.
HDX Power backup cables can interconnect up to five installation frames in parallel to implement a distributed Power Backup function.
The AC6430 is an RPD connection module for AC9100 NEO/AC9400 node.
The 6427 is a wall mounting bracket for AC series amplifiers and optical nodes.
The AC6415 is a USB extension cable 150 mm set, USB A (f) - USB mini B (m).
The PFS301 is a transformer with 230 V input and 48 V, 6.3 A (300 VA) output.
The PFS151 is a transformer with 230 V input and 48 V, 3.1 A (150 VA) output.
The PFM600 is a transformer with 230 V input and 60 V, 10 A (600 VA) output.
The ACE601, ACE602 and ACE603 power supplies can be used in optical nodes and amplifiers of the ACE series.
The AC6321 is a 27...65 VAC (sinus or square wave) / 35...90 VDC power supply unit to be used in the AC6440 RPD replacement kit.
The AC6320 is a complete, remote powered 90 VAC power supply kit for Teleste optical nodes and amplifiers.
The AC6317 is a 27...65 VAC / 35...90 VDC switch mode power supply kit for AC9000/9100.
The AC6316 is a 27…65 VAC / 35…90 VDC power supply kit for AC9000 optical node.
The AC6314 is a complete, local powered 230 VAC power supply kit for Teleste optical nodes and amplifiers.
The AC6313 is a complete, remote powered 65 VAC power supply kit for Teleste optical nodes and amplifiers.
The AC6310 is a power supply with an input of 27...65 V AC / 35...90 VDC for use in the lid mechanics of the AC8000/8800 nodes.
The TXX2C1 is a forward path equaliser that corrects roll-off at high and low-frequency ends.
The TXX258 is a forward path equaliser that corrects roll-off caused by 204/258 MHz diplex filters.
The TXX1G2 is a forward path equaliser with a supported frequency range of 85...1218 MHz that corrects roll-off at high-frequency end
The TXS0xx series cable simulators with a supported frequency range of 85...1218 MHz are designed to be used in 1.2 GHz amplifiers, but they can be used also in 1 GHz and 862 MHz products
The TNE0xx- series cable equalisers are designed to be used in 1.2 GHz amplifiers and nodes.
The CXM8/-14 tap modules with a supported frequency range of 5...1218 MHz for CX3 amplifiers.
The CXM4 is a splitter module with a supported frequency range of 5...1218 MHz for CX3 amplifiers.
The CXM1 is a jumper module with 0 dB attenuation for CX3 amplifiers.
The CXF204 is a plug-in diplex filter covering the frequency ranges 5...204 MHz / 258...1218 MHz.
The CXF0204 10/-19 are diplex filters combined with an ingress blocker.
The CXF085 is a plug-in diplex filter covering the frequency ranges 5...85 MHz / 102...1218 MHz.
The CXF085 is a plug-in diplex filter covering the frequency ranges 5...85 MHz / 105...1218 MHz.
CXF085 DA2/4/6 are plug-in diplex filters with a downstream attenuation, covering the frequency ranges 5...85 MHz / 105...1218 MHz.
The CXF065 19 is a combined diplex filter with an ingress blocker, covering the frequency ranges 18...65 MHz / 85...1218 MHz.
The CXF085 10 is a combined diplex filter with an ingress blocker, covering the frequency ranges 10...85 MHz / 105...1218 MHz.
The CXF065 is a plug-in diplex filter covering the frequency ranges 5...65 MHz / 85...1218 MHz.
The CXF085 19 is a combined diplex filter with an ingress blocker, covering the frequency ranges 18...85 MHz / 105...1218 MHz.
TheCXF065 10 is a combined diplex filter with an ingress blocker, covering the frequency ranges 10...65 MHz / 85...1218 MHz.
The AC625x return path modules are used in AC/ACE series amplifiers. These modules include slope adjustment, low pass filtering and response correction.
The AC6223 is a plug-in ingress blocker module (PB f > 16 MHz) designed to be used in AC-series distribution amplifiers.
The AC6570 and AC6572 are WDM filters for optical nodes in AC and CX product families.
The AC6124 is a 2 x 4 dB splitter module with a supported frequency range of 5...1218 MHz.
The AC6120 is an output module with 0 dB attenuation. Supports frequencies up to 1.2 GHz.
The AC6117 is a 2.0/10.0 dB tap module with a supported frequency range of 5...1218 MHz.
The AC6115 is a 1.0/16.0 dB tap module with a supported frequency range of 5...1218 MHz.
The AC6114 is a 2.0/12.0 dB tap module with a supported frequency range of 5...1218 MHz.
The AC6113 is a 2.0/8.5 dB tap module with a supported frequency range of 5…1218 MHz.
The AC6112 is a 1.5/12.0 dB tap module with a supported frequency range of 5...1006 MHz.
The AC6110 is a 1.2 GHz 0 dB jumper module to be used as an input module in AC- amplifier platform products.
The E61 is a RIS receiver module for remote control of ingress switches.
The AC6992 is a DOCSIS 3.1 frequency range compatible CATVisor/HMS transponder containing an RF modem and a level measurement unit.
The AC6918 is a pilot measurement module for enabling automatic gain and slope control, and automatic alignment.
The AC6700 are transmitter modules with +3 dBm or +6 dBm output power.
